# -*- coding: utf-8 -*-
# Copyright (c) 2019, PyRETIS Development Team.
# Distributed under the LGPLv2.1+ License. See LICENSE for more info.
"""A CP2K external MD integrator interface.
This module defines a class for using CP2K as an external engine.
Important classes defined here
------------------------------
CP2KEngine (:py:class:`.CP2KEngine`)
A class responsible for interfacing CP2K.
"""
import logging
import os
import re
import shlex
from pyretis.engines.external import ExternalMDEngine
from pyretis.core.random_gen import create_random_generator
from pyretis.inout.formats.xyz import (
read_xyz_file,
write_xyz_trajectory,
convert_snapshot
)
from pyretis.inout.formats.cp2k import (
update_cp2k_input,
read_cp2k_restart,
read_cp2k_box,
read_cp2k_energy,
)
logger = logging.getLogger(__name__) # pylint: disable=invalid-name
logger.addHandler(logging.NullHandler())
OUTPUT_FILES = {
'energy': '{}-1.ener',
'restart': '{}-1.restart',
'pos': '{}-pos-1.xyz',
'vel': '{}-vel-1.xyz',
'wfn': '{}-RESTART.wfn',
'wfn-bak': '{}-RESTART.wfn.bak-'
}
REGEXP_BACKUP = re.compile(r'\.bak-\d$')
[docs]def write_for_step_vel(infile, outfile, timestep, subcycles, posfile, vel,
name='md_step', print_freq=None):
"""Create input file for a single step.
Note, the single step actually consists of a number of subcycles.
But from PyRETIS' point of view, this is a single step.
Further, we here assume that we start from a given xyz file and
we also explicitly give the velocities here.
Parameters
----------
infile : string
The input template to use.
outfile : string
The file to create.
timestep : float
The time-step to use for the simulation.
subcycles : integer
The number of sub-cycles to perform.
posfile : string
The (base)name for the input file to read positions from.
vel : numpy.array
The velocities to set in the input.
name : string, optional
A name for the CP2K project.
print_freq : integer, optional
How often we should print to the trajectory file.
"""
if print_freq is None:
print_freq = subcycles
to_update = {
'GLOBAL': {
'data': ['PROJECT {}'.format(name),
'RUN_TYPE MD',
'PRINT_LEVEL LOW'],
'replace': True,
},
'MOTION->MD': {
'data': {'STEPS': subcycles,
'TIMESTEP': timestep}
},
'MOTION->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
'MOTION->PRINT->RESTART->EACH': {
'data': {'MD': print_freq}
},
'MOTION->PRINT->VELOCITIES->EACH': {
'data': {'MD': print_freq}
},
'MOTION->PRINT->TRAJECTORY->EACH': {
'data': {'MD': print_freq}
},
'FORCE_EVAL->SUBSYS->TOPOLOGY': {
'data': {'COORD_FILE_NAME': posfile,
'COORD_FILE_FORMAT': 'xyz'}
},
'FORCE_EVAL->SUBSYS->VELOCITY': {
'data': [],
'replace': True,
},
'FORCE_EVAL->DFT->SCF->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
}
for veli in vel:
to_update['FORCE_EVAL->SUBSYS->VELOCITY']['data'].append(
'{} {} {}'.format(*veli)
)
remove = [
'EXT_RESTART',
'FORCE_EVAL->SUBSYS->COORD'
]
update_cp2k_input(infile, outfile, update=to_update, remove=remove)
[docs]def write_for_integrate(infile, outfile, timestep, subcycles, posfile,
name='md_step', print_freq=None):
"""Create input file for a single step for the integrate method.
Here, we do minimal changes and just set the time step and subcycles
and the starting configuration.
Parameters
----------
infile : string
The input template to use.
outfile : string
The file to create.
timestep : float
The time-step to use for the simulation.
subcycles : integer
The number of sub-cycles to perform.
posfile : string
The (base)name for the input file to read positions from.
name : string, optional
A name for the CP2K project.
print_freq : integer, optional
How often we should print to the trajectory file.
"""
if print_freq is None:
print_freq = subcycles
to_update = {
'GLOBAL': {
'data': ['PROJECT {}'.format(name),
'RUN_TYPE MD',
'PRINT_LEVEL LOW'],
'replace': True,
},
'MOTION->MD': {
'data': {'STEPS': subcycles,
'TIMESTEP': timestep}
},
'MOTION->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
'MOTION->PRINT->RESTART->EACH': {
'data': {'MD': print_freq}
},
'MOTION->PRINT->VELOCITIES->EACH': {
'data': {'MD': print_freq}
},
'MOTION->PRINT->TRAJECTORY->EACH': {
'data': {'MD': print_freq}
},
'FORCE_EVAL->SUBSYS->TOPOLOGY': {
'data': {'COORD_FILE_NAME': posfile,
'COORD_FILE_FORMAT': 'xyz'}
},
'FORCE_EVAL->DFT->SCF->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
}
remove = [
'EXT_RESTART',
'FORCE_EVAL->SUBSYS->COORD'
]
update_cp2k_input(infile, outfile, update=to_update, remove=remove)
[docs]def write_for_continue(infile, outfile, timestep, subcycles,
name='md_continue'):
"""
Create input file for a single step.
Note, the single step actually consists of a number of subcycles.
But from PyRETIS' point of view, this is a single step.
Here, we make use of restart files named ``previous.restart``
and ``previous.wfn`` to continue a run.
Parameters
----------
infile : string
The input template to use.
outfile : string
The file to create.
timestep : float
The time-step to use for the simulation.
subcycles : integer
The number of sub-cycles to perform.
name : string, optional
A name for the CP2K project.
"""
to_update = {
'GLOBAL': {
'data': ['PROJECT {}'.format(name),
'RUN_TYPE MD',
'PRINT_LEVEL LOW'],
'replace': True,
},
'MOTION->MD': {
'data': {'STEPS': subcycles,
'TIMESTEP': timestep}
},
'MOTION->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
'MOTION->PRINT->RESTART->EACH': {
'data': {'MD': subcycles}
},
'MOTION->PRINT->VELOCITIES->EACH': {
'data': {'MD': subcycles}
},
'MOTION->PRINT->TRAJECTORY->EACH': {
'data': {'MD': subcycles}
},
'EXT_RESTART': {
'data': ['RESTART_VEL',
'RESTART_POS',
'RESTART_FILE_NAME previous.restart'],
'replace': True
},
'FORCE_EVAL->DFT': {
'data': {'WFN_RESTART_FILE_NAME': 'previous.wfn'},
},
'FORCE_EVAL->DFT->SCF->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
}
remove = [
'FORCE_EVAL->SUBSYS->TOPOLOGY',
'FORCE_EVAL->SUBSYS->VELOCITY',
'FORCE_EVAL->SUBSYS->COORD'
'FORCE_EVAL->DFT->RESTART_FILE_NAME',
]
update_cp2k_input(infile, outfile, update=to_update, remove=remove)
[docs]def write_for_genvel(infile, outfile, posfile, seed, name='genvel'):
"""Create input file for velocity generation.
Parameters
----------
infile : string
The input template to use.
outfile : string
The file to create.
posfile : string
The (base)name for the input file to read positions from.
seed : integer
A seed for generating velocities.
name : string, optional
A name for the CP2K project.
"""
to_update = {
'GLOBAL': {
'data': ['PROJECT {}'.format(name),
'SEED {}'.format(seed),
'RUN_TYPE MD',
'PRINT_LEVEL LOW'],
'replace': True,
},
'FORCE_EVAL->DFT->SCF': {
'data': {'SCF_GUESS': 'ATOMIC'}
},
'MOTION->MD': {
'data': {'STEPS': 1,
'TIMESTEP': 0}
},
'MOTION->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
'MOTION->PRINT->RESTART->EACH': {
'data': {'MD': 1}
},
'MOTION->PRINT->VELOCITIES->EACH': {
'data': {'MD': 1}
},
'MOTION->PRINT->TRAJECTORY->EACH': {
'data': {'MD': 1}
},
'FORCE_EVAL->SUBSYS->TOPOLOGY': {
'data': {'COORD_FILE_NAME': posfile,
'COORD_FILE_FORMAT': 'xyz'}
},
'FORCE_EVAL->DFT->SCF->PRINT->RESTART': {
'data': ['BACKUP_COPIES 0'],
'replace': True,
},
}
remove = [
'EXT_RESTART',
'FORCE_EVAL->SUBSYS->VELOCITY',
'FORCE_EVAL->DFT->RESTART_FILE_NAME',
]
update_cp2k_input(infile, outfile, update=to_update, remove=remove)
[docs]class CP2KEngine(ExternalMDEngine):
"""
A class for interfacing CP2K.
This class defines the interface to CP2K.
Attributes
----------
cp2k : string
The command for executing CP2K.
input_path : string
The directory where the input files are stored.
timestep : float
The time step used in the CP2K MD simulation.
subcycles : integer
The number of steps each CP2K run is composed of.
rgen : object like :py:class:`.RandomGenerator`
An object we use to set seeds for velocity generation.
extra_files : list
List of extra files which may be required to run CP2K.
"""
[docs] def __init__(self, cp2k, input_path, timestep, subcycles,
extra_files=None, seed=0):
"""Set up the CP2K engine.
Parameters
----------
cp2k : string
The CP2K executable.
input_path : string
The path to where the input files are stored.
timestep : float
The time step used in the CP2K simulation.
subcycles : integer
The number of steps each CP2K run is composed of.
extra_files : list
List of extra files which may be required to run CP2K.
seed : integer, optional
A seed for the random number generator.
extra_files : list
List of extra files which may be required to run CP2K.
"""
super().__init__('CP2K external engine', timestep,
subcycles)
self.rgen = create_random_generator({'seed': seed})
self.ext = 'xyz'
self.cp2k = shlex.split(cp2k)
logger.info('Command for execution of CP2K: %s', ' '.join(self.cp2k))
# Store input path:
self.input_path = os.path.abspath(input_path)
# Store input files:
input_files = {
'conf': 'initial.xyz',
'template': 'cp2k.inp',
}
self.input_files = self._look_for_input_files(
self.input_path,
input_files,
)
self.extra_files = {}
if extra_files is not None:
self.extra_files = self._look_for_input_files(
self.input_path,
{'file-{}'.format(i): val for i, val in enumerate(extra_files)}
)
[docs] def run_cp2k(self, input_file, proj_name):
"""
Run the CP2K executable.
Returns
-------
out : dict
The files created by the run.
"""
cmd = self.cp2k + ['-i', input_file]
logger.debug('Executing CP2K %s: %s', proj_name, input_file)
self.execute_command(cmd, cwd=self.exe_dir, inputs=None)
out = {}
for key, name in OUTPUT_FILES.items():
out[key] = os.path.join(self.exe_dir, name.format(proj_name))
return out
[docs] def _name_output(self, basename):
"""Return the name of the output file."""
out_file = '{}.{}'.format(basename, self.ext)
return os.path.join(self.exe_dir, out_file)
[docs] def _propagate_from(self, name, path, system, order_function, interfaces,
msg_file, reverse=False):
"""
Propagate with CP2K from the current system configuration.
Here, we assume that this method is called after the propagate()
has been called in the parent. The parent is then responsible
for reversing the velocities and also for setting the initial
state of the system.
Parameters
----------
name : string
A name to use for the trajectory we are generating.
path : object like :py:class:`.PathBase`
This is the path we use to fill in phase-space points.
system : object like :py:class:`.System`
The system object gives the initial state.
order_function : object like :py:class:`.OrderParameter`
The object used for calculating the order parameter.
interfaces : list of floats
These interfaces define the stopping criterion.
msg_file : object like :py:class:`.FileIO`
An object we use for writing out messages that are useful
for inspecting the status of the current propagation.
reverse : boolean, optional
If True, the system will be propagated backward in time.
Returns
-------
success : boolean
This is True if we generated an acceptable path.
status : string
A text description of the current status of the
propagation.
"""
status = 'propagating with CP2K (reverse = {})'.format(reverse)
logger.debug(status)
success = False
left, _, right = interfaces
logger.debug('Adding input files for CP2K')
# First, copy the required input files:
self.add_input_files(self.exe_dir)
# Get positions and velocities from the input file.
initial_conf = system.particles.get_pos()[0]
box, xyz, vel, atoms = self._read_configuration(initial_conf)
if box is None:
box, _ = read_cp2k_box(self.input_files['template'])
# Add CP2K input for a single step:
step_input = os.path.join(self.exe_dir, 'step.inp')
write_for_step_vel(self.input_files['template'], step_input,
self.timestep, self.subcycles,
os.path.basename(initial_conf),
vel, name=name)
# And create the input file for continuing:
continue_input = os.path.join(self.exe_dir, 'continue.inp')
write_for_continue(self.input_files['template'], continue_input,
self.timestep, self.subcycles, name=name)
# Get the order parameter before the run:
order = self.calculate_order(order_function, system,
xyz=xyz, vel=vel, box=box)
traj_file = os.path.join(self.exe_dir, '{}.{}'.format(name, self.ext))
# Create a message file with some info about this run:
msg_file.write(
'# Initial order parameter: {}'.format(
' '.join(['{}'.format(i) for i in order])
)
)
msg_file.write('# Trajectory file is: {}'.format(traj_file))
# Run the first step:
msg_file.write('# Running first CP2k step.')
out_files = self.run_cp2k('step.inp', name)
restart_file = os.path.join(self.exe_dir, out_files['restart'])
prestart_file = os.path.join(self.exe_dir, 'previous.restart')
wave_file = os.path.join(self.exe_dir, out_files['wfn'])
pwave_file = os.path.join(self.exe_dir, 'previous.wfn')
# Note: Order is calculated at the END of each iteration!
i = 0
# Write the config so we have a non-empty file:
write_xyz_trajectory(traj_file, xyz, vel, atoms, box, step=i,
append=False)
msg_file.write('# Running main CP2k propagation loop.')
msg_file.write('# Step order parameter cv1 cv2 ...')
for i in range(path.maxlen):
msg_file.write(
'{} {}'.format(i, ' '.join(['{}'.format(j) for j in order]))
)
snapshot = {'order': order, 'config': (traj_file, i),
'vel_rev': reverse}
phase_point = self.snapshot_to_system(system, snapshot)
status, success, stop, add = self.add_to_path(path, phase_point,
left, right)
if add and i > 0:
# Write the previous configuration:
write_xyz_trajectory(traj_file, xyz, vel, atoms, box,
step=i)
if stop:
logger.debug('CP2K propagation ended at %i. Reason: %s',
i, status)
break
if i == 0:
pass
elif i > 0:
self._movefile(restart_file, prestart_file)
self._movefile(wave_file, pwave_file)
if i < path.maxlen - 1:
out_files = self.run_cp2k('continue.inp', name)
self._remove_files(self.exe_dir,
self._find_backup_files(self.exe_dir))
# Read config after the step
if i < path.maxlen - 1:
atoms, xyz, vel, box, _ = read_cp2k_restart(restart_file)
order = self.calculate_order(order_function, system,
xyz=xyz, vel=vel, box=box)
msg_file.write('# Propagation done.')
energy_file = out_files['energy']
msg_file.write('# Reading energies from: {}'.format(energy_file))
energy = read_cp2k_energy(energy_file)
end = (i + 1) * self.subcycles
path.update_energies(energy['ekin'][:end:self.subcycles],
energy['vpot'][:end:self.subcycles])
for _, files in out_files.items():
self._removefile(files)
self._removefile(prestart_file)
self._removefile(pwave_file)
self._removefile(continue_input)
self._removefile(step_input)
return success, status
[docs] def integrate(self, system, steps, order_function=None, thermo='full'):
"""
Propagate several integration steps.
This method will perform several integration steps using
CP2K. It will also calculate the order parameter(s) and
energy terms if requested.
Parameters
----------
system : object like :py:class:`.System`
The system we are integrating.
steps : integer
The number of steps we are going to perform. Note that we
do not integrate on the first step (e.g. step 0) but we do
obtain the other properties. This is to output the starting
configuration.
order_function : object like :py:class:`.OrderParameter`, optional
An order function can be specified if we want to
calculate the order parameter along with the simulation.
thermo : string, optional
Select the thermodynamic properties we are to calculate.
Yields
------
results : dict
The results from a MD step. This contains the state of the system
and order parameter(s) and energies (if calculated).
"""
logger.debug('Integrating with CP2K')
# First, copy the required input files:
logger.debug('Adding input files for CP2K')
self.add_input_files(self.exe_dir)
# Get positions and velocities from the input file.
initial_conf = self.dump_frame(system)
box, xyz, vel, atoms = self._read_configuration(initial_conf)
if box is None:
box, _ = read_cp2k_box(self.input_files['template'])
name = 'pyretis-cp2k'
logger.debug('Thermo was set to: %s', thermo)
# Add CP2K input for a single step:
step_input = os.path.join(self.exe_dir, 'step.inp')
write_for_integrate(self.input_files['template'], step_input,
self.timestep, self.subcycles,
os.path.basename(initial_conf),
name=name)
# And create the input file for continuing:
continue_input = os.path.join(self.exe_dir, 'continue.inp')
write_for_continue(self.input_files['template'], continue_input,
self.timestep, self.subcycles, name=name)
# Get the order parameter before the run:
if order_function:
order = self.calculate_order(order_function, system,
xyz=xyz, vel=vel, box=box)
else:
order = None
traj_file = os.path.join(self.exe_dir, '{}.{}'.format(name, self.ext))
# Run the first step:
out_files = self.run_cp2k('step.inp', name)
restart_file = os.path.join(self.exe_dir, out_files['restart'])
prestart_file = os.path.join(self.exe_dir, 'previous.restart')
wave_file = os.path.join(self.exe_dir, out_files['wfn'])
pwave_file = os.path.join(self.exe_dir, 'previous.wfn')
# Note: Order is calculated at the END of each iteration!
i = 0
# Write the config so we have a non-empty file:
write_xyz_trajectory(traj_file, xyz, vel, atoms, box, step=i,
append=False)
for i in range(steps):
if i > 0:
# Write the previous configuration:
write_xyz_trajectory(traj_file, xyz, vel, atoms, box,
step=i)
if i == 0:
pass
elif i > 0:
self._movefile(restart_file, prestart_file)
self._movefile(wave_file, pwave_file)
if i < steps - 1: # Do not integrate the last step.
out_files = self.run_cp2k('continue.inp', name)
self._remove_files(self.exe_dir,
self._find_backup_files(self.exe_dir))
results = {}
if order:
results['order'] = order
# Read config after the step
if i < steps - 1:
atoms, xyz, vel, box, _ = read_cp2k_restart(restart_file)
if order_function:
order = self.calculate_order(order_function, system,
xyz=xyz, vel=vel, box=box)
energy = read_cp2k_energy(out_files['energy'])
end = (i + 1) * self.subcycles
results['thermo'] = {}
for key, val in energy.items():
results['thermo'][key] = val[:end:self.subcycles][-1]
yield results
# Note we do not remove the run-files here as they might be
# useful for the user.
[docs] def step(self, system, name):
"""Perform a single step with CP2K.
Parameters
----------
system : object like :py:class:`.System`
The system we are integrating.
name : string
To name the output files from the CP2K step.
Returns
-------
out : string
The name of the output configuration, obtained after
completing the step.
"""
initial_conf = self.dump_frame(system)
# Prepare input files etc.:
self.add_input_files(self.exe_dir)
box, xyz, vel, atoms = self._read_configuration(initial_conf)
if box is None:
box, _ = read_cp2k_box(self.input_files['template'])
# Add CP2K input for a single step:
step_input = os.path.join(self.exe_dir, 'step.inp')
write_for_step_vel(self.input_files['template'], step_input,
self.timestep, self.subcycles,
os.path.basename(initial_conf),
vel, name=name)
# Execute single step CP2K...
logger.debug('Executing CP2K')
out_files = self.run_cp2k('step.inp', name)
energy = read_cp2k_energy(out_files['energy'])
# Get the output configuration:
atoms, xyz, vel, box, _ = read_cp2k_restart(out_files['restart'])
conf_out = os.path.join(self.exe_dir, '{}.{}'.format(name, self.ext))
write_xyz_trajectory(conf_out, xyz, vel, atoms, box, append=False)
system.particles.set_pos((conf_out, None))
system.particles.set_vel(False)
system.particles.ekin = energy['ekin'][-1]
system.particles.vpot = energy['vpot'][-1]
system.update_box(box)
# Prepare input files etc.:
logger.debug('Removing CP2K output after single step.')
# Remove run-files etc:
for _, files in out_files.items():
self._removefile(files)
self._remove_files(
self.exe_dir,
self._find_backup_files(self.exe_dir)
)
return conf_out
[docs] @staticmethod
def _find_backup_files(dirname):
"""Return backup-files in the given directory."""
out = []
for entry in os.scandir(dirname):
if entry.is_file():
match = REGEXP_BACKUP.search(entry.name)
if match is not None:
out.append(entry.name)
return out
[docs] @staticmethod
def _read_configuration(filename):
"""
Read CP2K output configuration.
This method is used when we calculate the order parameter.
Parameters
----------
filename : string
The file to read the configuration from.
Returns
-------
box : numpy.array
The box dimensions if we manage to read it.
xyz : numpy.array
The positions.
vel : numpy.array
The velocities.
names : list of strings
The atom names found in the file.
"""
xyz, vel, box, names = None, None, None, None
for snapshot in read_xyz_file(filename):
box, xyz, vel, names = convert_snapshot(snapshot)
break # Stop after the first snapshot.
return box, xyz, vel, names
[docs] def _reverse_velocities(self, filename, outfile):
"""Reverse velocity in a given snapshot.
Parameters
----------
filename : string
The configuration to reverse velocities in.
outfile : string
The output file for storing the configuration with
reversed velocities.
"""
box, xyz, vel, names = self._read_configuration(filename)
write_xyz_trajectory(outfile, xyz, -1.0*vel, names, box, append=False)
[docs] def _prepare_shooting_point(self, input_file):
"""
Create initial configuration for a shooting move.
This creates a new initial configuration with random velocities.
Parameters
----------
input_file : string
The input configuration to generate velocities for.
Returns
-------
output_file : string
The name of the file created.
energy : dict
The energy terms read from the CP2K energy file.
"""
box, xyz, vel, atoms = self._read_configuration(input_file)
if box is None:
box, _ = read_cp2k_box(self.input_files['template'])
input_config = os.path.join(self.exe_dir, 'genvel_input.xyz')
write_xyz_trajectory(input_config, xyz, vel, atoms, box, append=False)
# Create input file for CP2K:
run_file = os.path.join(self.exe_dir, 'run.inp')
write_for_genvel(self.input_files['template'],
run_file,
'genvel_input.xyz',
self.rgen.random_integers(1, 999999999),
name='genvel')
# Prepare to run it:
self.add_input_files(self.exe_dir)
out_files = self.run_cp2k(run_file, 'genvel')
energy = read_cp2k_energy(out_files['energy'])
# Get the output configuration:
atoms, xyz, vel, box, _ = read_cp2k_restart(out_files['restart'])
conf_out = os.path.join(self.exe_dir,
'{}.{}'.format('genvel', self.ext))
write_xyz_trajectory(conf_out, xyz, vel, atoms, box, append=False)
# Remove run-files etc:
for _, files in out_files.items():
self._removefile(files)
self._remove_files(
self.exe_dir,
self._find_backup_files(self.exe_dir)
)
return conf_out, energy
[docs] def modify_velocities(self, system, rgen, sigma_v=None, aimless=True,
momentum=False, rescale=None):
"""
Modify the velocities of the current state.
This method will modify the velocities of a time slice.
Parameters
----------
system : object like :py:class:`.System`
System is used here since we need access to the particle
list.
rgen : object like :py:class:`.RandomGenerator`
This is the random generator that will be used.
sigma_v : numpy.array, optional
These values can be used to set a standard deviation (one
for each particle) for the generated velocities.
aimless : boolean, optional
Determines if we should do aimless shooting or not.
momentum : boolean, optional
If True, we reset the linear momentum to zero after generating.
rescale : float, optional
In some NVE simulations, we may wish to re-scale the energy to
a fixed value. If `rescale` is a float > 0, we will re-scale
the energy (after modification of the velocities) to match the
given float.
Returns
-------
dek : float
The change in the kinetic energy.
kin_new : float
The new kinetic energy.
"""
dek, kin_old, kin_new = None, None, None
if rescale is not None and rescale is not False and rescale > 0:
msgtxt = 'CP2K engine does not support energy re-scale.'
logger.error(msgtxt)
raise NotImplementedError(msgtxt)
else:
kin_old = system.particles.ekin
if aimless:
pos = self.dump_frame(system)
posvel, energy = self._prepare_shooting_point(pos)
kin_new = energy['ekin'][-1]
system.particles.set_pos((posvel, None))
system.particles.set_vel(False)
system.particles.ekin = kin_new
system.particles.vpot = energy['vpot'][-1]
else: # Soft velocity change, from a Gaussian distribution:
msgtxt = 'CP2K engine only support aimless shooting!'
logger.error(msgtxt)
raise NotImplementedError(msgtxt)
if momentum:
pass
if kin_old is None or kin_new is None:
dek = float('inf')
logger.warning(('Kinetic energy not found for previous point.'
'\n(This happens when the initial configuration '
'does not contain energies.)'))
else:
dek = kin_new - kin_old
return dek, kin_new